Includes: 1 Mast, 1 EVA cover, 4 M6 x 25mm screws & 4 T-Nut washers
F-One High Modulus Carbon Mast T2
Types:
12mm (75cm- 95cm)
HM 14mm (75cm- 105cm)
UHM 14mm (75cm- 105cm)
16mm V2 (80cm ,85cm)
UHM 12mm
This mast features a very slim profile with a tapered chord and thickness. It is slightly wider and thicker at the top and narrows down near the fuselage. This design, with just 12 mm at its thinnest point, maximizes glide and speed across all disciplines. It helps you go faster during downwind runs, get more pop to boost higher in tricks, and reach new top speeds while wing foiling or kite foiling.
The UHM Carbon layup, custom-tailored for this mast, makes it 25% stiffer in bending than the HM Carbon 14 mast, providing outstanding rigidity and precise control in both bending and torsion for excellent maneuverability, a direct feel, and superior performance.
Molded and cured in a single shot from carbon pre-preg, the one-piece construction integrates our optimized SPINE internal structure for enhanced rigidity, efficiency, and control, especially through turns. This advanced build delivers the next level of stiffness, precision, and performance.
This mast features our new top plate and the updated TITAN 2 mast foot at the bottom. The redesigned top plate is now compatible with our lockable T-nuts and includes our keyhole-shaped “Quick-Attach System” for faster assembly. This mast can be connected to virtually all boards on the market featuring the Twin-Tracks system and is compatible with all front wings using the TITAN 2 connection.
Available in 80, 85 and 95 cm, this new UHM Carbon Mast 12 offers the performance upgrade you’ve been looking for and is the ideal choice for downwind riding or any discipline where glide is paramount.
UHM 14mm
Built for heavier riders seeking even more stiffness, lightness, control and energy transfer, the new F-ONE UHM CARBON MAST 14 pushes performance even further. It shares the same thin 14 mm profile and full Monobloc construction as the HM version but introduces a custom Ultra High Modulus (UHM) Carbon layup that makes it 28% stiffer for unmatched rigidity and responsiveness.
From the first flight, you’ll feel this mast’s lightness, speed, and direct response. The thin 14 mm profile slices cleanly through the water, reducing drag and boosting acceleration, pumping efficiency, and topend speed. Every leg input is translated into instant glide and forward motion, giving you total control whether downwinding, freestyling, or freeriding.
Molded in one shot from pre-preg carbon, the one-piece construction integrates a reinforced SPINE internal structure and benefits from F-ONE’s Dynamic Structural Design. The layers of carbon fibers have been carefully distributed at 0° lengthwise to optimize stiffness in bending and at about 45° to optimize stiffness in torsion. Finally, its layup has been finely tuned and optimized for each mast length to offer the best performance in each sport and condition.
The use of UHM Carbon provides outstanding rigidity and precise control in bending and torsion for excellent maneuverability, a direct feel, and superior performance.
This mast features our new top plate and the TITAN 2 mast foot at the bottom. The top plate is compatible with our lockable T-nuts and includes our keyhole-shaped “Quick-Attach System” for faster assembly. This mast can be connected to virtually all boards on the market featuring the Twin-Tracks system and is compatible with all front wings using the TITAN 2 connection.
Only available in 80 and 85 cm, the UHM CARBON MAST 14 is the go-to for riders looking for top-tier stiffness, stability, and sensations.
HM 14mm
The F-ONE HM CARBON MAST 14 offers an outstanding balance of glide, control, and stiffness for riders pushing their performance in all foiling disciplines. Built with a refined layup of High Modulus Carbon, this mast brings sharp sensations, direct feedback, and an unmistakable feel of efficiency in every ride.
From the very first flight, you’ll feel how light, responsive, and efficient this mast is. Its thin 14 mm profile slices through the water with ease, reducing drag and boosting your ability to accelerate, pump, and maintain speed.
Ideal for long downwind runs, dynamic freestyle sessions, or simply freeriding, this mast transforms energy from your legs into smooth forward motion and speed, making every pump count and letting you enjoy its glide to the max.
Fully molded in one shot from pre-preg carbon, its Monobloc construction integrates a now-reinforced SPINE internal structure and benefits from F-ONE’s Dynamic Structural Design. The layers of carbon fibers have been carefully distributed at 0° lengthwise to optimize stiffness in bending and at about 45° to optimize stiffness in torsion. Finally, its layup has been finely tuned and optimized for each mast length to offer the best performance in each sport and condition.
This mast features our new top plate and the updated TITAN 2 mast foot. The redesigned top plate is now compatible with our lockable T-nuts and includes our keyhole-shaped “Quick-Attach System” for faster assembly. The mast can be connected to virtually all boards on the market featuring the Twin-Tracks system and is compatible with all front wings using the TITAN 2 connection.
Available in sizes from 75 to 105 cm, the HM CARBON MAST 14 is a premium gear for riders looking for speed, glide, and high control, whether pumping out of turns, linking bumps, or sending tricks.
Let it glide further, and feel the difference.
16mm
Ultra-stiff and durable, the F-ONE Carbon Mast 16 will bring instant feedback and direct sensations while foiling.
The Carbon Mast 16mm thick is intrinsically very stiff and offers the best compromise between rigidity and glide. Its full Monobloc construction brings absolute rigidity and helps reduce drag to a minimum, leading to easier starts and the utmost connection between the foil and the board. Every small steering and input will immediately translate down to the foil, and the feedback will be just as direct.
The mast is in one piece and built in carbon pre-preg, all molded and cured in one shot. Our SPINE internal structure ensures the best rigidity and control while riding. The layers of carbon fibers have been carefully distributed at 0° lengthwise to optimize stiffness in bending and at about 45° to optimize stiffness in torsion. Our specific layup leads to the best compromise between bending and torsional stiffness, allowing you to fully stay in control and comfortable in all situations and at high speeds.
This mast now features our new top plate and the updated TITAN 2 mast foot. The redesigned top plate is now compatible with our lockable T-nuts and includes our keyhole-shaped “Quick-Attach System” for faster assembly. The mast can be connected to virtually all boards on the market featuring the Twin-Tracks system and is compatible with all front wings using the TITAN 2 connection.
Available in 80 and 85 cm, this mast excels in all disciplines, with the 80 cm version specially refined for surf foiling: better pumping, fewer tip breaches, and precise maneuverability.
Let it glide with the F-ONE Carbon Mast 16, an outstanding and efficient mast that offers the most direct feeling, easy turns, excellent maneuvering, and effective pumping.
Includes: 1 Mast, 1 EVA cover, 4 M6 x 25mm screws & 4 T-Nut washers
F-One High Modulus Carbon Mast T2
Types:
12mm (75cm- 95cm)
HM 14mm (75cm- 105cm)
UHM 14mm (75cm- 105cm)
16mm V2 (80cm ,85cm)
UHM 12mm
This mast features a very slim profile with a tapered chord and thickness. It is slightly wider and thicker at the top and narrows down near the fuselage. This design, with just 12 mm at its thinnest point, maximizes glide and speed across all disciplines. It helps you go faster during downwind runs, get more pop to boost higher in tricks, and reach new top speeds while wing foiling or kite foiling.
The UHM Carbon layup, custom-tailored for this mast, makes it 25% stiffer in bending than the HM Carbon 14 mast, providing outstanding rigidity and precise control in both bending and torsion for excellent maneuverability, a direct feel, and superior performance.
Molded and cured in a single shot from carbon pre-preg, the one-piece construction integrates our optimized SPINE internal structure for enhanced rigidity, efficiency, and control, especially through turns. This advanced build delivers the next level of stiffness, precision, and performance.
This mast features our new top plate and the updated TITAN 2 mast foot at the bottom. The redesigned top plate is now compatible with our lockable T-nuts and includes our keyhole-shaped “Quick-Attach System” for faster assembly. This mast can be connected to virtually all boards on the market featuring the Twin-Tracks system and is compatible with all front wings using the TITAN 2 connection.
Available in 80, 85 and 95 cm, this new UHM Carbon Mast 12 offers the performance upgrade you’ve been looking for and is the ideal choice for downwind riding or any discipline where glide is paramount.
UHM 14mm
Built for heavier riders seeking even more stiffness, lightness, control and energy transfer, the new F-ONE UHM CARBON MAST 14 pushes performance even further. It shares the same thin 14 mm profile and full Monobloc construction as the HM version but introduces a custom Ultra High Modulus (UHM) Carbon layup that makes it 28% stiffer for unmatched rigidity and responsiveness.
From the first flight, you’ll feel this mast’s lightness, speed, and direct response. The thin 14 mm profile slices cleanly through the water, reducing drag and boosting acceleration, pumping efficiency, and topend speed. Every leg input is translated into instant glide and forward motion, giving you total control whether downwinding, freestyling, or freeriding.
Molded in one shot from pre-preg carbon, the one-piece construction integrates a reinforced SPINE internal structure and benefits from F-ONE’s Dynamic Structural Design. The layers of carbon fibers have been carefully distributed at 0° lengthwise to optimize stiffness in bending and at about 45° to optimize stiffness in torsion. Finally, its layup has been finely tuned and optimized for each mast length to offer the best performance in each sport and condition.
The use of UHM Carbon provides outstanding rigidity and precise control in bending and torsion for excellent maneuverability, a direct feel, and superior performance.
This mast features our new top plate and the TITAN 2 mast foot at the bottom. The top plate is compatible with our lockable T-nuts and includes our keyhole-shaped “Quick-Attach System” for faster assembly. This mast can be connected to virtually all boards on the market featuring the Twin-Tracks system and is compatible with all front wings using the TITAN 2 connection.
Only available in 80 and 85 cm, the UHM CARBON MAST 14 is the go-to for riders looking for top-tier stiffness, stability, and sensations.
HM 14mm
The F-ONE HM CARBON MAST 14 offers an outstanding balance of glide, control, and stiffness for riders pushing their performance in all foiling disciplines. Built with a refined layup of High Modulus Carbon, this mast brings sharp sensations, direct feedback, and an unmistakable feel of efficiency in every ride.
From the very first flight, you’ll feel how light, responsive, and efficient this mast is. Its thin 14 mm profile slices through the water with ease, reducing drag and boosting your ability to accelerate, pump, and maintain speed.
Ideal for long downwind runs, dynamic freestyle sessions, or simply freeriding, this mast transforms energy from your legs into smooth forward motion and speed, making every pump count and letting you enjoy its glide to the max.
Fully molded in one shot from pre-preg carbon, its Monobloc construction integrates a now-reinforced SPINE internal structure and benefits from F-ONE’s Dynamic Structural Design. The layers of carbon fibers have been carefully distributed at 0° lengthwise to optimize stiffness in bending and at about 45° to optimize stiffness in torsion. Finally, its layup has been finely tuned and optimized for each mast length to offer the best performance in each sport and condition.
This mast features our new top plate and the updated TITAN 2 mast foot. The redesigned top plate is now compatible with our lockable T-nuts and includes our keyhole-shaped “Quick-Attach System” for faster assembly. The mast can be connected to virtually all boards on the market featuring the Twin-Tracks system and is compatible with all front wings using the TITAN 2 connection.
Available in sizes from 75 to 105 cm, the HM CARBON MAST 14 is a premium gear for riders looking for speed, glide, and high control, whether pumping out of turns, linking bumps, or sending tricks.
Let it glide further, and feel the difference.
16mm
Ultra-stiff and durable, the F-ONE Carbon Mast 16 will bring instant feedback and direct sensations while foiling.
The Carbon Mast 16mm thick is intrinsically very stiff and offers the best compromise between rigidity and glide. Its full Monobloc construction brings absolute rigidity and helps reduce drag to a minimum, leading to easier starts and the utmost connection between the foil and the board. Every small steering and input will immediately translate down to the foil, and the feedback will be just as direct.
The mast is in one piece and built in carbon pre-preg, all molded and cured in one shot. Our SPINE internal structure ensures the best rigidity and control while riding. The layers of carbon fibers have been carefully distributed at 0° lengthwise to optimize stiffness in bending and at about 45° to optimize stiffness in torsion. Our specific layup leads to the best compromise between bending and torsional stiffness, allowing you to fully stay in control and comfortable in all situations and at high speeds.
This mast now features our new top plate and the updated TITAN 2 mast foot. The redesigned top plate is now compatible with our lockable T-nuts and includes our keyhole-shaped “Quick-Attach System” for faster assembly. The mast can be connected to virtually all boards on the market featuring the Twin-Tracks system and is compatible with all front wings using the TITAN 2 connection.
Available in 80 and 85 cm, this mast excels in all disciplines, with the 80 cm version specially refined for surf foiling: better pumping, fewer tip breaches, and precise maneuverability.
Let it glide with the F-ONE Carbon Mast 16, an outstanding and efficient mast that offers the most direct feeling, easy turns, excellent maneuvering, and effective pumping.